PPG PR1428 B-1/2 Access Door Sealant 6 oz Semkit
PPG PR1428 Class B is a low adhesion, two-part sealant. Designed for use as an access door sealant or in the fabrication of form-in-place (FIP) gaskets, it can also be used to protect electrical wires, terminals and equipment against fuel, moisture, dirt and short circuits.
Technical Information
- Product Type Specialty Sealant
- Product Form Paste
Product Information
It is a manganese dioxide cured polysulfide compound, and the uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula.
It has a service temperature range of -54°C (-65°F) to 121°C (250°F), with intermittent excursions up to 135°C (275°F). It cures at room temperature to form a removable seal to common aircraft substrates.
Data Sheets
Product Properties
Shipping Information
For information about the available delivery options please visit our Shipping Guide.
Some products in our catalog are classified as Hazardous for shipping so some restrictions and/or additional shipping fees may apply.