PPG PR1428 B-2 Access Door Sealant 1 pt Kit
PPG PR1428 Class B is a low adhesion, two-part sealant. Designed for use as an access door sealant or in the fabrication of form-in-place (FIP) gaskets, it can also be used to protect electrical wires, terminals and equipment against fuel, moisture, dirt and short circuits.
Technical Information
- UN Number UN3077 CL9
- Product Type Specialty Sealant
- Product Form Paste
HAZMAT: This product is classified as Hazardous for transport. This may limit the carrier options that are available.
WARNING: Cancer - www.P65Warnings.ca.gov please review the product SDS before purchase..
Product Information
It is a manganese dioxide cured polysulfide compound, and the uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula.
It has a service temperature range of -54°C (-65°F) to 121°C (250°F), with intermittent excursions up to 135°C (275°F). It cures at room temperature to form a removable seal to common aircraft substrates.
Data Sheets
Product Properties
Shipping Information
For information about the available delivery options please visit our Shipping Guide.
Some products in our catalog are classified as Hazardous for shipping so some restrictions and/or additional shipping fees may apply.