Quick View

It is recommended that all retainers be mechanically riveted or screwed to the aircraft structure and that a good quality adhesive (DG PN 15348) be used to seal the area underneath the retainer.

 See Options
Bulk discounts
1+
$0.00 + VAT
1+
$506.44 + VAT
Skip to main content

Dayton-Granger 16307 Mounting Retainer Adhesive 1 oz 2 Part Kit

GracoRoberts P/N: 101568-100
Bulk discounts
1+
$0.00 + VAT
1+
$506.44 + VAT

It is recommended that all retainers be mechanically riveted or screwed to the aircraft structure and that a good quality adhesive (DG PN 15348) be used to seal the area underneath the retainer.

Technical Information

  • Product Type Specialty Adhesive
  • Product Form Liquid

Product Information

This adhesive is a special two-part silver-loaded conductive epoxy. The primary purpose of this conductive adhesive is to attach retainers where rivets and other fastening devices cannot be used, such as when retainers are mounted on honeycomb surfaces or on tip tanks.

One epoxy kit contains enough material to mount approximately eight retainers.

Data Sheets

No Datasheets Available

Product Properties

Brand
Dayton-Granger
Manufacturer
Dayton-Granger, Inc.
Product Type
Specialty Adhesive
Product Form
Liquid
Product Size
1 oz 2 Part Kit
Manufacturer Part #
16307

Shipping Information

For information about the available delivery options please visit our Shipping Guide.

Some products in our catalog are classified as Hazardous for shipping so some restrictions and/or additional shipping fees may apply.