Loctite Stycast HD 3475 Hardener 1 qt Can
Hardener HD3475 is the hardener component known to be used with RE2038 and RE2039 resins. Supplied in a Quart Can **Please Note this is the hardener component Only,
- UN Number UN2079 CL8
- Product Type Hardener
- Product Form Liquid
HAZMAT: This product is classified as Hazardous for transport. This may limit the carrier options that are available.
WARNING: Reproductive Harm - www.P65Warnings.ca.gov please review the product SDS before purchase.
These systems have proven themselves with a 20-year service record on solenoid coils, transformers, resistors, connectors and hundreds of other applications
Diluted Epoxy Resins:
HYSOL resin RE2038 with hardener HD3475 is a low viscosity, general casting system with excellent electrical and physical properties. It can be used whenever a rigid compound is needed and very low mixed viscosity is critical. HYSOL casting compound EE4143 with hardener HD3475 is silica filled for improved thermal properties, lower shrinkage and lower expansion characteristics.
Undiluted Epoxy Resin systems:
HYSOL resin RE2039 with hardener HD3475 is an undiluted epoxy 100% solids system and should be used where very low mixed viscosity is not a critical requirement. The undiluted resin exhibits a higher heat distortion, lower moisture absorption, lower shrinkage and lower expansion characteristics than obtainable with a diluted resin.
HYSOL casting compound EE4183 with hardener HD3475 is silica filled for improved thermal properties, lower shrinkage and lower expansion characteristics. They are resistant to gasoline, jet fuel and other solvents.
For information about the available delivery options please visit our Shipping Guide.
Some products in our catalog are classified as Hazardous for shipping so some restrictions and/or additional shipping fees may apply.