Ardrox AV40 Corrosion Inhibiting Compound 5 gal Pail
GracoRoberts P/N: 128373-100
$3,022.05
Ardrox AV40 is applied as a coating to protect metals commonly used in airframe structures and in aerospace components from corrosion.
Technical Information
- UN Number UN1139 CL3
- Product Type Corrosion Inhibiting Compound
- Product Form Liquid
HAZMAT: Â This product is classified as Hazardous for transport. This may limit the carrier options that are available.
USA ONLY: Â This product cannot be shipped outside of the USA due to distributor agreements and export shipping rules.
Product Information
AV 40 is designed for use in areas of the aircraft exposed to elevated temperatures. Typical applications include engine components, pylons and cowlings.
AV 40 will withstand continuous temperatures up to 150°C (302°F) and short term exposure to temperatures up to 210°C (410°F). It is colourless and can be applied to aircraft exterior surfaces exposed to high temperatures, for example adjacent to auxiliary power unit (APU) exhaust systems where hot gases are expelled.
Ardrox AV40 can be applied by dipping, brushing or spraying. For maximum penetration capability and the most effective corrosion inhibiting performance, spray application is recommended.
The coating should be applied at 60 to 100 µm / 2,4 – 4 mils wet thickness. Movable parts should be masked before treatment. If Ardrox AV40 spray control or masking of movable components is not possible, then an alternative soft waxy film CIC, such as Ardrox AV25 should be used
Data Sheets
Product Properties
Brand
Chemetall Ardrox
Manufacturer
Chemetall
Product Type
Corrosion Inhibiting Compound
Product Form
Liquid
Product Size
5 gal Pail
Manufacturer Part #
50603039
Also Known As
Dinitrol AV40 Corrosion Inhibiting Compound
Shipping Information
For information about the available delivery options please visit our Shipping Guide.
Some products in our catalog are classified as Hazardous for shipping so some restrictions and/or additional shipping fees may apply.