Resin Formulators Water Absorption Testing Per ASTM 570 (Customer Supplied Material)
Water Absorption Test
Resin Formulators now offers advanced lab testing for its own Resin Formulators epoxy resins, as well as specialty chemicals manufactured by other suppliers.
The primary purpose of the Water Absorption Test is to determine the amount of water a material absorbs under specific conditions, providing insights into its durability, porosity, and suitability for use in moisture-prone environments.
Note: Testing will be completed on non-RF material that you supply to our laboratory.
Technical Information
- Product Type Testing Method
- Product Form Test
Product Information
For this test, the samples are dried for a given time at a specified temperature and then cooled to 75°F. The samples are measured immediately after cooling and then placed inside water under specified conditions, usually at 23°C for 24 hours or until it reaches an equilibrium. Finally, the samples are removed from the water, patted dry with a lint-free cloth, and weighed. Water absorption is expressed as an increase in weight percent.
Data Sheets
Product Properties
You May Also Like
Shipping Information
For information about the available delivery options please visit our Shipping Guide.
Some products in our catalog are classified as Hazardous for shipping so some restrictions and/or additional shipping fees may apply.