Beacon Magna-Tac E645 MP Stack Lamination Epoxy 1 gal Kit
Beacon Magna-Tac E645 is a two-part, thermosetting, formulated epoxy adhesive for bonding stack laminations used in stators, rotors, gyros, servomechanisms, synchros, transformers and magnetic amplifiers.
Technical Information
- UN Number UN1133 CL3
- Product Type Epoxy Adhesive
- Product Form Liquid
HAZMAT: This product is classified as Hazardous for transport. This may limit the carrier options that are available.
Product Information
It can also be used as an insulating varnish for impregnated coils and small electrical equipment. Bonding is achieved by heat, and only sufficient pressure to assure complete contact is needed.
Because so little adhesive is needed to accomplish a strong bond which resists shear stress, Magna-Tac E645 has proved practical as an adhesive/dielectric in the fabrication of magnetic accelerator units such as cyclotrons and cosmotrons.
Magna-Tac E645 is a strong metal-to-metal adhesive. Because of its excellent mechanical strength plus its resistance to many solvents, water, atmospheric conditions and temperature changes, this adhesive is adaptable to many industrial uses. It is particularly suited to the bonding of large surface areas and mass production processing.
Data Sheets
Product Properties
Shipping Information
For information about the available delivery options please visit our Shipping Guide.
Some products in our catalog are classified as Hazardous for shipping so some restrictions and/or additional shipping fees may apply.