Airtech Airpad Tooling Rubber 1/16 in x 54 in x 50 ft Roll
Airtech Airpad is an uncured non-silicone rubber that can be made into pressure caul sheets and flexible mandrels. The Airpad pressure intensifier provides uniform pressure distribution during autoclave processing.
Technical Information
- Product Type Composite Material
- Product Form Roll
Product Information
This creates toolside part quality on the vacuum bag side of the part. Airpad will take high temperature similar to silicone rubbers but will not cause silicone contamination.
Airpad is dimensionally stable when reinforced with Toolmaster Prepreg TMGP 4100 or TMFP 3100. Toolmaster TMGP 4100 and TMFP 3100 have the same flow and cure temperature as Airpad making a perfect bond. Toolmaster is a hot melt system that does not give off volatiles from solvents that could also cause delamination.
Airpad must be reinforced with Toolmaster prepreg to stay dimensionally stable. Never reinforce the male radius if stretch is needed.
Data Sheets
Product Properties
Shipping Information
For information about the available delivery options please visit our Shipping Guide.
Some products in our catalog are classified as Hazardous for shipping so some restrictions and/or additional shipping fees may apply.