Quick View
Product Code: V00808
From $8.87

AeroShell straight mineral oils, including AeroShell Piston Engine Oil 80, are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (which is added when improved fluidity at very low temperature is required) and an antioxidant.

 See Options
Skip to main content

AeroShell Oil 80

GracoRoberts P/N: V00808
From $8.87

AeroShell straight mineral oils, including AeroShell Piston Engine Oil 80, are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (which is added when improved fluidity at very low temperature is required) and an antioxidant.

Technical Information

  • Product Type Piston Engine Oil
  • Product Form Liquid

Product Information

This AeroShell Oil is approved for use in four-stroke (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive.

AeroShell Piston Engine Oil 80 is used primarily during break-in of most new or recently overhauled four-stroke aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.

It is possible to run engines permanently on straight mineral oils but, as straight mineral oils do not contain any additives, they tend to cause deposits to form in the engine. The "W" ashless dispersant oils contain an additive that is designed to keep particles separated so that they do not congregate to form a large mass. Elaborate precautions are not needed when changing from straight mineral oil to AeroShell W Oils, since both types of oil are compatible with each other.

Other AeroShell straight mineral oils are available, differentiated by a numbered suffix. The suffix for each grade corresponds to the viscosity of the oil at 99°C (210°F) in Saybolt Universal Seconds.

Data Sheets

Please select the size/colour from the dropdown to access datasheets

Product Properties

Brand
AeroShell
Manufacturer
AeroShell
Product Type
Piston Engine Oil
Product Form
Liquid
Manufacturer Part #
550041181 | 550050831

Additional Content

Request a Technical Consultation
Request a Technical Consultation
AeroShell Brand Page
AeroShell Brand Page
AeroShell Specification Guide
AeroShell Specification Guide

Shipping Information

For information about the available delivery options please visit our Shipping Guide.

Some products in our catalog are classified as Hazardous for shipping so some restrictions and/or additional shipping fees may apply.