Quick View
Product Code: 150966-100
$25.46

AeroShell Turbine Oil 390 is a 3 mm2/s synthetic diester oil incorporating a carefully selected and balanced combination of additives to improve thermal and oxidation stability and to increase the load carrying ability of the base oil.

 See Options

Additional Requirements

Required Items

Skip to main content

AeroShell Turbine Oil 390 1 qt Can

GracoRoberts P/N: 150966-100
$25.46
Estimated lead time 25 business days
Please order in multiples of 24

Additional Requirements

Required Items

AeroShell Turbine Oil 390 is a 3 mm2/s synthetic diester oil incorporating a carefully selected and balanced combination of additives to improve thermal and oxidation stability and to increase the load carrying ability of the base oil.

Technical Information

  • Product Type Turbine Engine Oil
  • Product Form Liquid
⚠

WARNING: Known to cause cancer and reproductive harm. See www.P65Warnings.ca.gov and refer to SDS before use.

Product Information

Applications:

AeroShell Turbine Oil 390 was developed primarily as an improved 3 mm2/s oil for British turbo-jet engines and it is fully approved for a wide range of turbine engines.

More recently, because of the low temperature characteristics of AeroShell Turbine Oil 390, there is interest in using this oil in auxiliary power units (APU) in order to overcome the effects of cold soak. Normal practice is to shut down the APU during cruise, the APU then experiences cold soak, often prolonged, and when the unit is started there is considerable difficulty resulting in the unit not coming up to speed in the given time, thus causing a hung start.

In such cases where the APU is subject to a long cold soak the viscosity of standard 5 mm2/s oils used in the APU will increase from 5 mm2/s at 100°C (212°F) to typically 10,000 mm2/s at -40°C (-40°F). At this much higher viscosity the oil cannot flow easily leading to a large viscous drag within the APU, thereby contributing to the difficulty in starting. AeroShell Turbine Oil 390 on the other hand experiences a much smaller viscosity increase (typically 2000 mm2/s at –40°C) with a reduction in viscous drag which is often sufficient to overcome hung start problems. All experience to date shows a considerable improvement in cold reliability of the APU when AeroShell Turbine Oil 390 is used.

Data Sheets

No Datasheets Available

Product Properties

Brand
AeroShell
Manufacturer
AeroShell
Product Type
Turbine Engine Oil
Product Form
Liquid
Product Size
1 qt Can
Manufacturer Part #
550049742
Country Of Origin
Switzerland

Shipping Information

For information about the available delivery options please visit our Shipping Guide.

Some products in our catalog are classified as Hazardous for shipping so some restrictions and/or additional shipping fees may apply.