Flashbreaker 2R Green Pressure Sensitive Tape
Flashbreaker 2R (HT) is a polyester pressure sensitive tape coated with a high tack, non-silicone adhesive.
Technical Information
- Product Type Pressure Sensitive Tape
- Product Form Tape
TEXAS ONLY: This product cannot be shipped outside of TEXAS due to the terms of our distribution agreement with the vendor.
Product Information
This tape holds down vacuum bagging materials and thermocouple wires on metal or composite parts and tooling. Flashbreaker 2R (HT) is a superior tape for holding down non-woven breather materials. Flashbreaker 2R (HT) has high temperature capabilities, making it a good choice for oven or autoclave cures to 400°F (204°C).
Features:
- Rubber adhesive tape can be used where silicone adhesives are prohibited to reduce contamination risk.
- Higher tack rubber adhesive holds materials in place quicker, better, and faster.
- Flashbreaker 2R (HT) can remove heavier flash build up, reducing difficult clean-up effort.
- Broken CSs and otherWidths available on special order.
- The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, testing recommended prior to use.
Data Sheets
Product Properties
Shipping Information
For information about the available delivery options please visit our Shipping Guide.
Some products in our catalog are classified as Hazardous for shipping so some restrictions and/or additional shipping fees may apply.